Based on your location it seems like you might be looking for the Canadian site.
Would you like to continue, or switch to the Canadian site?
Close
Prev
Next
Ducts Dampers & Adapters
Tandem Kit with Metal Hood
More than ever, today’s builders and contractors are aiming to optimize material, manpower and time. One way to achieve this goal when installing a ventilation system is to install our new metal tandem hood. This new device simplifi es the installation not only because only one hole is required on the exterior wall. In fact, every installer knows that locating effi ciently one outside port is easier (and faster) than locating two. Moreover, there is hardly any intercontamination!
Model:
14695-Venmar
Features
- Metal dual exterior hood; simplifies installation for units producing 120 CFM maximum.
- Galvanized satin steel cover grille (ready to be painted by the HVAC contractor to match building’s color)
- One 7” x 18” hole in the exterior wall
- Tandem box eliminates the need of a Tandem transition.
- Intake and exhaust ducts connection can be performed either on left or right port, for more convenience
- Outside connection performed in half time
- Suitable for ventilation unit producing an airflow lower than 120 CFM (for higher airflow capacity, please confi rm that the overall pressure losses of the ventilation system is suitable for the unit used)
- Downloads